Optics (physics.optics)

Abstract: Several ways to electronically synchronize different types of amplified femtosecond laser systems are presented, based on a single freely programmable electronics hardware: Arbitrary-detuning asynchronous optical sampling, as well as actively locking two femtosecond laser oscillators, albeit not necessarily to the same round-trip frequency. They allow us to rapidly probe a very wide range of timescales, from picoseconds to potentially seconds, in a single transient absorption experiment without the need to move any delay stage. Experiments become possible that address a largely unexplored aspect of many photochemical reactions, in particular in the context of photo-catalysis as well as photoactive proteins, where an initial femtosecond trigger very often initiates a long-lasting cascade of follow-up processes. The approach is very versatile, and allows us to synchronize very different lasers, such as a Ti:Sa amplifier and a 100~kHz Yb-laser system. The jitter of the synchronisation, and therewith the time-resolution in the transient experiment, lies in the range from 1~ps to 3~ps, depending on the method. For illustration, transient IR measurements of the excited state solvation and decay of a metal carbonyl complex as well as the full reaction cycle of bacteriorhodopsin are shown. The pros and cons of the various methods are discussed, with regard to the scientific question one might want to address, and also with regard to the laser systems that might be already existent in a laser lab.

Abstract: Fiber-based confocal endomicroscopy has shown great promise for minimally-invasive deep-tissue imaging. Despite its advantages, confocal fiber-bundle endoscopy inherently suffers from undersampling due to the spacing between fiber cores, and low collection efficiency when the target is not in proximity to the distal fiber facet. Here, we demonstrate an adaptation of image-scanning microscopy (ISM) to lensless fiber bundle endoscopy, doubling the spatial sampling frequency and significantly improving collection efficiency. Our approach only requires replacing the confocal detector with a camera. It improves the spatial resolution for targets placed at a distance from the fiber tip, and addresses the fundamental challenge of aliasing/pixelization artifacts.

Abstract: Photonic reservoir computing (PRC) is a special hardware recurrent neural network, which is featured with fast training speed and low training cost. This work shows a wavelength-multiplexing PRC architecture, taking advantage of the numerous longitudinal modes in a Fabry-Perot semiconductor laser. These modes construct connected physical neurons in parallel, while an optical feedback loop provides interactive virtual neurons in series. We experimentally demonstrate a four-channel wavelength-multiplexing PRC, which runs four times faster than the single-channel case. It is proved that the multiplexing PRC exhibits superior performance on the task of signal equalization in an optical fiber communication link. Particularly, this scheme is highly scalable owing to the rich mode resources in Fabry-Perot lasers.

Abstract: Photonic Time crystals (PTC) arise in time-modulated media when the frequency of modulation of permittivity is on the order of twice the frequency of light and are manifested by the generation and amplification of so-called time reversed waves propagating in the direction opposite to the incoming light. Superficially, the observed phenomenon bears resemblance to the widely known phenomena of optical parametric generation (OPG) and amplification (OPA) using second or third order optical nonlinearities. I show that while indeed the same physical mechanism underpins both PTC and OPA , the difference arises from the boundary conditions. Thus , while dispersion for both PTC and OPA exhibit the same bandgap in momentum space, only in the case of PTC can one have propagation in that bandgap with exponential amplification. I also show that PTC can be engineered with both second and third order nonlinearities, and that rather unexpectedly, modulating permittivity on the ultrafast (few fs) rate is not a necessity, and that one can emulate all the PTC features using materials with a few picoseconds response time commensurate with the propagation time through the medium.

Abstract: In this thesis, we propose to tackle this important issue by designing and realizing a novel nano-optical device based on the use of a photonic crystal (PC) structure to generate an efficient coupling between the external source and a NA. In this dissertation, the content is arranged into three charpters. Chapter 1 introduces the theoritical background of this research including surface plasmon and photonic crystal concepts. This chapter also shows the design of the hybrid devices and demonstrates the numerical simulation of their optical properties. Chapter 2 mainly describes the process and the fabricated samples. The nanodevices are fabricated on an InP membrane substrate. The critical technology for the fabrication is complex electron beam lithography. With this technology the alignment of the positions of PC structure and NA is well controlled. Chapter 3 demonstrates the optical characterizations of the hybrid nanodevices including far-field characterizations and near-field characterizations. The far-field measurement is performed by micro-photoluminescence spectroscopy at room temperature. The results show that for the defect PC cavities, the presence of the NA influences the optical properties of the laser, such as lasing threshold and laser wavelength. The near-field measurement is performed by near-field scanning microscopy, at room temperature also. The investigation shows that the NA modifies the optical field distribution of the laser mode. The modification depends on the position and direction of the NA and it is sensitive to the polarization of the optical field.

Abstract: The emerging Internet of Things (IoTs) invokes increasing security demands that require robust encryption or anti-counterfeiting technologies. Albeit being acknowledged as efficacious solutions in processing elaborate graphical information via multiple degrees of freedom, optical data encryption and anti-counterfeiting techniques are typically inept in delivering satisfactory performance without compromising the desired ease-of-processibility or compatibility, thus leading to the exploration of novel materials and devices that are competent. Here, a robust optical data encryption technique is demonstrated utilizing polymer-stabilized-liquid-crystals (PSLCs) combined with projection photoalignment and photopatterning methods. The PSLCs possess implicit optical patterns encoded via photoalignment, as well as explicit geometries produced via photopatterning. Furthermore, the PSLCs demonstrate improved robustness against harsh chemical environments and thermal stability, and can be directly deployed onto various rigid and flexible substrates. Based on this, it is demonstrated that single PSLC is apt to carry intricate information, or serve as exclusive watermark with both implicit features and explicit geometries. Moreover, a novel, generalized design strategy is developed, for the first time, to encode intricate and exclusive information with enhanced security by spatially programming the photoalignment patterns of a pair of cascade PSLCs, which further illustrates the promising capabilies of PSLCs in optical data encryption and anti-counterfeiting.