Optics (physics.optics)

Abstract: We review the physics and some applications of photonic structures designed for the realisation of strong $\textit{nonlinear chiroptical response}$. We pay much attention to the recent strategy of utilizing different types of $\textit{optical resonances}$ in metallic and dielectric subwavelength structures and metasurfaces, including surface plasmon resonances, Mie resonances, lattice guided modes, and bound states in the continuum. We summarize earlier results and discuss more recent developments for achieving large circular dichroism combined with the high efficiency of nonlinear harmonic generation.

Abstract: Despite the apparent simplicity, the problem of refraction of electromagnetic waves at the planar interface between two media has an incredibly rich spectrum of unusual phenomena. An example is the paradox that occurs when an electromagnetic wave is incident on the interface between a hyperbolic medium and an isotropic dielectric. At certain orientations of the optical axis of the hyperbolic medium relative to the interface, the reflected and transmitted waves are completely absent. In this paper, we formulate the aforementioned paradox and present its resolution by introduction of infinitesimal losses in a hyperbolic medium. We show that the reflected wave exists, but became extremely decaying as the loss parameter tends to zero. As a consequence, all the energy scattered into the reflected channel is absorbed at the interface. We support our reasoning with analytical calculations, numerical simulations, and an experiment with self-complementary metasurfaces in the microwave region. In addition to the great fundamental interest, this paradox resolution discovers a plethora of applications for the reflectors, refractors, absorbers, lenses, antennas, camouflage and holography applications.

Abstract: In this paper, we introduce a method for mapping profiles of internal electric fields in birefringent crystals based on the electro-optic Pockels effect and measuring phase differences of low-intensity polarized light. In the case of the studied 6H-SiC crystal with graphene electrodes, the experiment is significantly affected by birefringence at zero bias voltage applied to the crystal and a strong thermo-optical effect. We dealt with these phenomena by adding a Soleil-Babinet compensator and using considerations based on measurements of crystal heating under laser illumination. The method can be generalized and adapted to any Pockels crystal that can withstand sufficiently high voltages. We demonstrate the significant formation of space charge in semi-insulating 6H-SiC under illumination by above-bandgap light.

Abstract: Two-dimensional (2D) van der Waals layered materials with intriguing properties are increasingly being adopted in hybrid photonics. The 2D materials are often integrated with photonic structures including cavities to enhance light-matter coupling, providing additional control and functionality. The 2D materials, however, needs to be precisely placed on the photonic cavities. Furthermore, the transfer of 2D materials onto the cavities could degrade the cavity quality $(Q)$ factor. Instead of using prefabricated PhC nanocavities, we demonstrate a novel approach to form a hybrid nanocavity by partially covering a PhC waveguide post-fabrication with a suitably-sized 2D material flake. We successfully fabricated such hybrid nanocavity devices with hBN, WSe$_2$ and MoTe$_2$ flakes on silicon PhC waveguides, obtaining $Q$ factors as high as $4.0\times10^5$. Remarkably, even mono- and few-layer flakes can provide sufficient local refractive index modulation to induce nanocavity formation. Since the 2D material is spatially self-aligned to the nanocavity, we have also managed to observe cavity PL enhancement in a MoTe$_2$ hybrid cavity device, with a cavity Purcell enhancement factor of about 15. Our results highlights the prospect of using such 2D materials-induced PhC nanocavity to realize a wide range of photonic components for hybrid devices and integrated photonic circuits.

Abstract: Reconfigurable intelligent surfaces (RISs) are electromagnetically passive controllable structures, deflecting the incident wave beam in directions predefined by the control signal. A usual way to design RIS based on metasurfaces (MSs) is based on the application of the approximation in which the reflective properties of a uniform MS are attributed to a unit cell of the non-uniform one. We call this approximation the reflection locality. In the present paper, we show that this approximation may result in heavy errors. We also find a condition under which this approximation is applicable for a wide range of incidence and deflection angles. This condition is the angular stability of the reflection phase of a uniform MS based on which the non-uniform one is generated. We present an approximate analytical proof of the equivalence of the reflection locality and angular stability. As an example, we report theoretical and experimental results we obtained for a binary RIS whose generic uniform analogue has the angular stability. Meanwhile, for its counterpart without angular stability (the so-called mushroom MS) the same model fails.

Abstract: The Multi-Armed Bandit (MAB) problem, foundational to reinforcement learning-based decision-making, addresses the challenge of maximizing rewards amidst multiple uncertain choices. While algorithmic solutions are effective, their computational efficiency diminishes with increasing problem complexity. Photonic accelerators, leveraging temporal and spatial-temporal chaos, have emerged as promising alternatives. However, despite these advancements, current approaches either compromise computation speed or amplify system complexity. In this paper, we introduce a chaotic microresonator frequency comb (chaos comb) to tackle the MAB problem, where each comb mode is assigned to a slot machine. Through a proof-of-concept experiment, we employ 44 comb modes to address an MAB with 44 slot machines, demonstrating performance competitive with both conventional software algorithms and other photonic methods. Further, the scalability of decision making is explored with up to 512 slot machines using experimentally obtained temporal chaos in different time slots. Power-law scalability is achieved with an exponent of 0.96, outperforming conventional software-based algorithms. Moreover, we find that a numerically calculated chaos comb accurately reproduces experimental results, paving the way for discussions on strategies to increase the number of slot machines.

Abstract: We demonstrate live-updating ptychographic reconstruction with ePIE, an iterative ptychography method, during ongoing data acquisition. The reconstruction starts with a small subset of the total data, and as the acquisition proceeds the data used for reconstruction is extended. This creates a live-updating view of object and illumination that allows monitoring the ongoing experiment and adjusting parameters with quick turn-around. This is particularly advantageous for long-running acquisitions. We show that such a gradual reconstruction yields interpretable results already with a small subset of the data. We show simulated live processing with various scan patterns, parallelized reconstruction, and real-world live processing at the hard X-ray ptychographic nanoanalytical microscope PtyNAMi at the PETRA III beamline.