Optics (physics.optics)

Abstract: Bound states in the continuum (BICs) in gratings composed of infinitely long silicon rods of rectangular cross-section are considered. We reveal merging off-$\Gamma$ Friedrich-Wintgen BIC with symmetry protected BIC. We present CMT and multipole decomposition theory complementary each other to analyze the merging phenomenon. The theories show a crossover of the behavior of $Q$-factor from standard inverse square law $k_{x,z}^{-2}$ towards to extremely fast boosting law $k_{x,z}^{-6}$ in momentum space. In turn that crossover gives rise to another crossover from $Q\sim N^2$ to $Q\sim N^3$ for symmetry protected quasi BIC in finite grating of $N$ rods owing to suppression of radiation leakage of quasi BIC mode from surface of grating. As a result the $Q$-factor of quasi BIC is determined by residual leakage from ends of grating. We show numerically that this leakage also can be suppressed considerably if to stretch grating from the ends.

Abstract: Structured light has proven instrumental in 3D imaging, LiDAR, and holographic light projection. Metasurfaces, comprised of sub-wavelength-sized nanostructures, facilitate 180$^\circ$ field-of-view (FoV) structured light, circumventing the restricted FoV inherent in traditional optics like diffractive optical elements. However, extant metasurface-facilitated structured light exhibits sub-optimal performance in downstream tasks, due to heuristic pattern designs such as periodic dots that do not consider the objectives of the end application. In this paper, we present neural 360$^\circ$ structured light, driven by learned metasurfaces. We propose a differentiable framework, that encompasses a computationally-efficient 180$^\circ$ wave propagation model and a task-specific reconstructor, and exploits both transmission and reflection channels of the metasurface. Leveraging a first-order optimizer within our differentiable framework, we optimize the metasurface design, thereby realizing neural 360$^\circ$ structured light. We have utilized neural 360$^\circ$ structured light for holographic light projection and 3D imaging. Specifically, we demonstrate the first 360$^\circ$ light projection of complex patterns, enabled by our propagation model that can be computationally evaluated 50,000$\times$ faster than the Rayleigh-Sommerfeld propagation. For 3D imaging, we improve depth-estimation accuracy by 5.09$\times$ in RMSE compared to the heuristically-designed structured light. Neural 360$^\circ$ structured light promises robust 360$^\circ$ imaging and display for robotics, extended-reality systems, and human-computer interactions.

Abstract: A generic novel model governing optical pulse propagation in a nonlinear dispersive amplifying medium with asymmetric (linear spectral slope) gain is introduced. We examine the properties of asymmetric optical pulses formed in such gain-skewed media, both theoretically and numerically. We derive a dissipative optical modification of the classical shallow water equations that highlights an analogy between this phenomenon and hydrodynamic wave-breaking. We observe the development of spectral optical shock waves, and discuss the conditions and origins of this spectral wave-breaking in media with asymmetric gain. These findings provide insight into the nature of asymmetric optical pulses capable of accumulating large nonlinear phase without wave-breaking, a crucial aspect in the design of nonlinear fiber amplifiers.

Abstract: Two dimensional semiconductors have attracted considerable attention owing to their exceptional electronic and optical characteristics. However, their practical application has been hindered by the limited light absorption resulting from their atomically thin thickness and low quantum yield. A highly effective approach to manipulate optical properties and address these limitations is integrating subwavelength plasmonic nanostructures with these monolayers. In this study, we employed electron beam lithography and electroplating technique to fabricate a gold nanodisc (AuND) array capable of enhancing the photoluminescence (PL) of monolayer MoS$_2$ giantly. Monolayer MoS$_2$ placed on the top of the AuND array yields up to 150-fold PL enhancement compared to that on a gold film. We explain our experimental findings based on electromagnetic simulations.

Abstract: The characterization of Earth-like exoplanets and precision tests of cosmological models using next-generation telescopes such as the ELT will demand precise calibration of astrophysical spectrographs in the visible region, where stellar absorption lines are most abundant. Astrocombs--lasers providing a broadband sequence of ultra-narrow, drift-free, regularly spaced optical frequencies on a multi-GHz grid--promise an atomically-traceable, versatile calibration scale, but their realization is challenging because of the need for ultra-broadband frequency conversion of mode-locked infrared lasers into the blue-green region. Here, we introduce a new concept achieving a broad, continuous spectrum by combining second-harmonic generation and sum-frequency-mixing in an aperiodically-poled MgO:PPLN waveguide to generate gap-free 390-520 nm light from a 1 GHz Ti:sapphire laser frequency comb. We lock a low-dispersion Fabry-Perot etalon to extract a sub-comb of bandwidth from 392-472 nm with a spacing of 30 GHz, visualizing the thousands of resulting comb modes on a high resolution cross-dispersion spectrograph. Complementary experimental data and simulations demonstrate the effectiveness of the approach for eliminating the spectral gaps present in second-harmonic-only conversion, in which weaker fundamental frequencies are suppressed by the quadratic \{chi}^((2)) nonlinearity. Requiring only ~100 pJ pulse energies, our concept establishes a practical new route to broadband UV-visible generation at GHz repetition rates.

Abstract: Structural disorder can improve the optical properties of metasurfaces, whether it is emerging from some large-scale fabrication methods, or explicitly designed and built lithographically. Correlated disorder, induced by a minimum inter-nanostructure distance or by hyperuniformity properties, is particularly beneficial in some applications such as light extraction. We introduce numerical descriptors inspired from topology to provide quantitative measures of disorder whose universal properties make them suitable for both uncorrelated and correlated disorder, where statistical descriptors are less accurate. We prove theoretically and experimentally the accuracy of these topological descriptors of disorder by using them to design plasmonic metasurfaces of controlled disorder, that we correlate to the strength of their surface lattice resonances. These tools can be used for the fast and accurate design of disordered metasurfaces, or to help tuning large-scale fabrication methods.

Abstract: Astronomical precision spectroscopy underpins searches for life beyond Earth, direct observation of the expanding Universe and constraining the potential variability of physical constants across cosmological scales. Laser frequency combs can provide the critically required accurate and precise calibration to the astronomical spectrographs. For cosmological studies, extending the calibration with such astrocombs to the ultraviolet spectral range is highly desirable, however, strong material dispersion and large spectral separation from the established infrared laser oscillators have made this exceedingly challenging. Here, we demonstrate for the first time astronomical spectrograph calibrations with an astrocomb in the ultraviolet spectral range below 400 nm. This is accomplished via chip-integrated highly nonlinear photonics in periodically-poled, nano-fabricated lithium niobate waveguides in conjunction with a robust infrared electro-optic comb generator, as well as a chip-integrated microresonator comb. These results demonstrate a viable route towards astronomical precision spectroscopy in the ultraviolet and may contribute to unlocking the full potential of next generation ground- and future space-based astronomical instruments.

Abstract: Dynamic wavefront shaping with optical metasurfaces has presented a major challenge and inspired a large number of highly elaborate solutions. Here, we experimentally demonstrate thermo-optically reconfigurable, nonlocal metasurfaces using simple device architectures and conventional CMOS-compatible dielectric materials. These metasurfaces support quasi-bound states in the continuum (q-BICs) derived from symmetry breaking and encoded with a spatially varying geometric phase, such that they shape optical wavefront exclusively on spectrally narrowband resonances. Due to the enhanced light-matter interaction enabled by the resonant q-BICs, a slight variation of the refractive index introduced by heating and cooling the entire device leads to a substantial shift of the resonant wavelength and a subsequent change to the optical wavefront associated with the resonance. We experimentally demonstrate a metalens modulator, the focusing capability of which can be thermally turned on and off, and reconfigurable metalenses, which can be thermo-optically switched to produce two distinct focal patterns. Our devices offer a pathway to realize reconfigurable, multifunctional meta-optics using established manufacturing processes and widely available dielectric materials that are conventionally not considered "active" materials due to their small thermo-optic or electro-optic coefficients.