Advancing Electroformed X-ray Optics Bridging Synchrotron Radiation Technology and Space Astronomy: Improved Figure Accuracy and X-ray Imaging Performancev
Advancing Electroformed X-ray Optics Bridging Synchrotron Radiation Technology and Space Astronomy: Improved Figure Accuracy and X-ray Imaging Performancev
Ikuyuki Mitsuishi, Yusuke Yoshida, Kazuki Ampuku, Makoto Yoshihara, Keitoku Yoshihira, Tetsuo Kano, Naoki Ishida, Koki Sakuta, Noriyuki Narukage, Keisuke Tamura, Kikuko Miyata, Gota Yamaguchi, Hidekazu Takano, Yoshiki Kohmura, Shutaro Mohri, Takehiro Kume, Yusuke Matsuzawa, Yoichi Imamura, Takahiro Saito, Kentaro Hiraguri, Hirokazu Hashizume, Hidekazu Mimura
AbstractWe have developed high-resolution electroformed nickel X-ray telescope mirrors by extending precision mirror-fabrication techniques developed for synchrotron X-ray microscopy to space astronomy. Our previous study identified axial figure errors of a replicated mirror as one of the factors limiting its X-ray angular resolution. In the present study, we fabricated a new mirror using a substantially improved mandrel and directly compared the two-dimensional figure errors of the mandrels and replicated inner mirror surfaces for both the previous and new mandrel--mirror pairs. This comparison reveals how contributions to the final mirror figure errors changed with improved mandrel accuracy. For the previous mirror, the mandrel and mirror showed a strong spatial correlation in their figure errors, indicating that a substantial component of the mirror figure pattern was inherited from the mandrel. In contrast, after improving the mandrel figure, the new mirror exhibited a weaker mandrel--mirror spatial correlation, while the residual figure deviations arising between the mandrel and final mirror became comparable in magnitude to the residual mandrel figure errors. The improved mandrel reduced the central 68% widths, W68, of the axial slope error distribution from 3.3 to 1.6 arcsec for the paraboloidal surface and from 5.0 to 1.1 arcsec for the hyperboloidal surface. Correspondingly, the mirror values improved from 4.6 to 2.4 arcsec and from 12.4 to 2.0 arcsec, respectively. X-ray measurements at 12 keV yielded local half power diameters (HPDs) of approximately 7--17 arcsec and a full-aperture HPD of 8.5 arcsec. The newly fabricated mirror was adopted for the soft X-ray telescope of the fifth Focusing Optics X-ray Solar Imager (FOXSI-5) sounding rocket flight and was successfully flown in May 2026.